I have a 2009 roadglide every 2 to 3000 miles I get shaking in the handle bars when i remove my hands at low speed 35 -60 mph Harley claims it is just routine maintenace of the stering head bearings I have not had this problem with any other year Harley I have Owned also I have 2 freinds with 09 ultras with the same problem . Anyone else ?

Sounds to me like it is a manufacturing problem. I have never heard about something like that before. This may be the start of a recall problem. If you don't get any satisfaction from your local dealer then I would call the factory and talk to them.

I agree with lenny, I think that sometimes things go unnoticed and if you talk to the factory they might just fix the problem. I have called the factory and have had great luck it did take some time but I got it fixed.

Thanks, I will see what the local does this time

I had to "adjust" mine but it's not a reoccurring problem.
94 road king

I would like to know what you outcome is. Please keep us updated as to how your problem turns out.

Very interested on the outcome here too. This could result in a recall, safety is a prime concern.

Had that happen on my 08 Ultra at 25K. Looked at the fron tire and found feathering. Replaced the front tire. Problem gone.
Just sayin that was my experience.

It's probably a loose neck bearing. The tire wobbles I have experienced was at high speed, not so much on deceleration.

Are they saying it has to be adjusted every 2000 to 3000 miles? That does not sound routine.

This is what it looks like on my bike.
Take out the headlight assembly.
Remove the crown
Remove the bar cover
Remove the light bar - several fluffy towels on the front fender and rest the bar on that.
Dis-assemble the entire front nacelle.
Bend down the locking tabs - steel
Use a big wrench 1.25 if I remember right maybe bigger... I used my largest Cresent Wrench (18")
Cranked down on it a little then test to make sure its not hanging up.
I had the bike on the jack with minimal weight on the front end.
Crank down a little more it started to get stiff- backed it off a little till it turned freely.
Bent the tab back up so it cant loosen.
Put every thing back together and rides perfect.